Your specialist in interior and exterior resin flooring
Durable, resistant and easily customisable floors
Discover the many advantages of resin flooring!
- An extremely robust floor resistant to heavy loads
- Suitable for both interior and exterior use
- Resin flooring is recyclable and environmentally friendly
- UV-resistant, maintaining its colour quality over time
- Resin flooring is permeable, allowing water to infiltrate
- Minimal maintenance and easy cleaning with a water jet
The stages of resin floor installation
Reliable techniques and suitable tools for a professional application of your resin floor covering
Floor preparation before installation
Our specialists prepare the substrate using innovative and proven techniques
Whether the substrate is concrete, tiles or opus, Art Deco Lux prepares it to facilitate the application of the resin. We begin with floor sanding, degreasing, cleaning and protecting the base of the walls with adhesive tape to prevent any soiling.
Substrate edging with aluminium strips
This step properly delineates the coating and the areas to be covered
The installation of aluminium strips delineates the working surface to prevent any resin overflow onto adjacent areas. This guarantees a clean application and a perfect finish. The aluminium edging also enables the creation of colour and pattern zones.
Application of a primer coat
The primer coat enables the resin to bond to the substrate
Applying the primer is a crucial step. It is applied using a roller following standard painting techniques. The aim is to create an adhesive bond between the substrate and the final resin coating, reinforcing their cohesion by reducing the porosity of the substrate.
Mixing the marble resin compound
Proportional dosing and thorough, homogeneous mixing of the components
Concentration and expertise are essential. Our professionals work with great dexterity to produce a fluid and homogeneous mixture: resin and hardener in a large container using a mixer. Once ready, we proceed with application before it hardens.
Application of the resin layer to the floor
Our professionals apply the resin in a fluid and rapid manner
The preparation is poured onto the floor by specialist technicians, who spread it evenly across the room. The resin coating is guaranteed to be fully cured from the seventh day after installation.
Finishing for improved resistance
For your safety, we apply an anti-slip finish
A resin floor can be very slippery, increasing the risk of falls. We ensure the application of a non-slip, protective finish, as a floor is subject to numerous mechanical and climatic stresses.
All types of resin floor coverings
Pebble Grey
Nero Blanco
Terra Red
Labrador
Licht
SR
Taunus
Kasteel Beige
Kasteel Grijs
TERRADEC GOLD: A permeable coating system
A laying system perfectly suited to exterior coverings
The TERRADEC GOLD permeable floor laying system has numerous advantages: it is economical, resistant, durable, requires very little maintenance, is anti-slip, and can easily accommodate any customisation, allowing you to perfect the aesthetic appearance for a modern and attractive look.
TERRADEC GOLD is characterised by its bonded aggregate composition, making it perfectly suited to outdoor spaces such as garden and driveway paths, poolsides, and much more.
TERRADEC CLEAR: a UV-stable binder!
Art Deco Lux brings you the impressive benefits of the TERRADEC CLEAR laying system
The TERRADEC CLEAR permeable coating laying system is applied in one or two coats. It offers the same advantages as TERRADEC GOLD with one key difference: a UV-stable binder, unlike the GOLD variant.
TERRADEC CLEAR is joint-free, dries within a maximum of four hours, withstands harsh weather conditions such as storms and much more. At Art Deco Lux, we are at your service for any information about TERRADEC CLEAR.
EASY FIT: a low-permeability jointing technique
Art Deco Lux puts all its EASY FIT expertise at your disposal!
The EASY FIT jointing technique for paving, tiles and stone on outdoor floors delivers an excellent quality result with a flawless finish. EASY FIT is characterised by its low permeability, simple, effective and very rapid application.
The EASY FIT technique gives you a resistant, durable floor with an aesthetic finish that suits both rustic and modern outdoor settings. Art Deco Lux stands ready to provide personalised solutions for your exterior flooring needs.
